FAQ

Why do split-entry homes have radon problems?

Direct answer

A split-entry puts living space in direct ground contact on its lower level, often with a slab section and a shallow foundation under one roof. More ground contact means more entry area, and the lower-level bedrooms sit right where the gas concentrates.

More detail

The Twin Cities built split-entries and split-levels by the tens of thousands from the late 1960s through the early 1980s, and they fill whole sections of Coon Rapids, Blaine, Burnsville, Maple Grove and Bloomington. The design is efficient and the radon profile is manageable, but it has quirks. The lower level sits only half below grade, so owners treat it as ordinary living space, bedrooms included, and occupancy down there turns a moderate concentration into a meaningful dose. The foundation often mixes a slab-on-grade section under the entry with a deeper section under the back, and sometimes a crawl under an addition; each section can need its own look during design, and occasionally its own suction point. Testing should happen on the lower level, where people sleep, not the kitchen upstairs. The mitigation itself is routine, and a single fan usually covers both sections. See our split-entry deep dive.

Authoritative sources

Ready to get started?

About 2 in 5 Minnesota homes tested hold radon at levels worth fixing, by MDH's own count. Mon-Sat 8am-7pm.

Call (651) 317-5960Text us

Prefer to text? Open your texting app