FAQ

Why is my radon still high after mitigation?

Direct answer

Usually one of four reasons: the suction field does not reach the whole slab, a big pathway like an unsealed sump is still open, the fan is undersized for tight soil, or the retest itself was run badly. Each one is findable and fixable.

More detail

Rule out the test first, because it is the cheap suspect: the retest should run under closed-house conditions, on the lowest lived-in level, with the system on, not during a windstorm, and no earlier than a day or two after the fan first spun. If the number survives a clean retest, the diagnosis moves under the slab. Twin Cities clay till is the classic culprit; dense soil can limit how far one suction point's pressure field extends, leaving a far corner of a big footprint unprotected, and the fix is a second suction point or a fan sized for tight soil. Next, walk the openings: a sump basket whose cover never sealed, a slab cut hidden behind the basement finish, block wall tops never capped. In Minnesota you also have procedural recourse: the install was done under an MDH license and tagged, the proposal stated its scope, and a licensed professional stands behind the result, so start the conversation with the installer and the paperwork. The repair service handles second opinions on inherited systems.

Authoritative sources

Ready to get started?

About 2 in 5 Minnesota homes tested hold radon at levels worth fixing, by MDH's own count. Mon-Sat 8am-7pm.

Call (651) 317-5960Text us

Prefer to text? Open your texting app