Resource · Minneapolis, MN

Twin Cities radon by county: zones, averages and housing

Minnesota measures its radon problem better than most states, and the measurements say more than the maps. The EPA zone map puts Hennepin, Ramsey, Dakota, Washington, Scott and Carver counties in Zone 1, the highest-potential tier, and Anoka County in Zone 2. The map dates to 1993 and predicts county averages from geology; the EPA itself warns against using it to decide whether any single house needs a test.

The measured record is sharper. MDH's statewide data for 2010 to 2016 put 44.1 percent of tested properties at or above 4 pCi/L with an average of 4.5, and MDH summarizes the ongoing picture as about 2 in 5 tested homes holding a level that poses a serious health risk. Within the metro, individual results scatter widely around those averages in every county.

The rows below pair each county's data with the housing reality that shapes testing and mitigation across Minneapolis, St. Paul and the suburbs.

CountyEPA zoneWhat the data and the housing say
HennepinZone 1The metro's population center, from 1880s Minneapolis basements to Maple Grove new builds. Statewide averages apply; the oldest stock needs the most sealing scope, and the newest carries post-2009 passive pipes.
RamseyZone 1St. Paul and its inner-ring suburbs. Individual results scatter widely; the county line protects nobody's basement.
DakotaZone 1Eagan, Burnsville and Lakeville: the split-entry belt plus newer walkouts. Lower-level bedrooms are common, which concentrates occupancy on the level that reads highest.
WashingtonZone 1Woodbury's post-1990 subdivisions and Stillwater's 19th-century stone foundations bracket the metro's housing range. Rural St. Croix valley properties add private wells to the question list.
AnokaZone 2Moderate radon potential by EPA zone, but the zone predicts a county average, not a house, and statewide about 2 in 5 tested Minnesota homes reach a level MDH calls a serious health risk. The sandy Anoka plain carries less uranium yet moves soil gas freely.
ScottZone 1The southwest metro edge, newer construction heavy. Post-2009 homes carry passive rough-ins that a test, then possibly a fan, completes.
CarverZone 1The metro's western growth edge, similar profile: newer poured foundations, walkouts, passive pipes in the recent stock, and clay-till soils beneath all of it.

Every row ends at the same instruction. Test the lowest level someone actually uses, during the heating season when the house shows its peak, with a kit for curiosity or an MDH-licensed professional when a transaction needs the number to stand. At 4 pCi/L or more, fix the home; between 2 and 4, a long-term test over a winter is the honest tiebreaker.

For the geology behind the zones, see why Minnesota runs high. For what a fix costs by foundation, see the pricing guide.

Ready to get started?

About 2 in 5 Minnesota homes tested hold radon at levels worth fixing, by MDH's own count. Mon-Sat 8am-7pm.

Call (651) 317-5960Text us

Prefer to text? Open your texting app