FAQ

My house has a radon pipe but no fan. What do I do with it?

Direct answer

That is a passive rough-in, standard in Minnesota homes built since 2009. Test the house first. If the result is 4 pCi/L or more, a licensed pro adds an inline fan to the existing pipe, which activates the system at modest cost.

More detail

Find the pipe first: a 3- or 4-inch PVC run rising from the slab through a utility chase or closet, sometimes labeled, with a capped junction box near it in the attic where the builder anticipated a fan. Check that it actually exits the roof; a pipe that dead-ends in the attic is a defect, not a system, and would dump soil gas into the attic if a fan were ever added. Then test, because a passive stack alone may or may not be holding the house down. Activation is compensated radon work, so in Minnesota it belongs to an MDH-licensed mitigation professional and the finished system gets a gauge, labels and the state tag. The fan goes in the attic run or outside, never in living space, so a failure can never leak pressurized soil gas into rooms. Budget $800 to $1,300. The result gets verified like any install, with a retest; see is my system working for the ongoing checks.

Authoritative sources

Ready to get started?

About 2 in 5 Minnesota homes tested hold radon at levels worth fixing, by MDH's own count. Mon-Sat 8am-7pm.

Call (651) 317-5960Text us

Prefer to text? Open your texting app